![]() |
Product Main Function
1.After the operator wears the alarm, and close to the high voltage charged body for a certain distance, the alarm will send out a sound and light alarm according to the safety distance of the corresponding voltage level to remind the electrical worker to pay attention to safety and avoid high voltage electric shock accident.
2. Alarm Voltage Range :1kV~220kV
3. Electricity Testing Mode :Non-contact mode
4. Detection Mode :Automatic trigger
Product Main Function
1.After the operator wears the alarm, and close to the high voltage charged body for a certain distance, the alarm will send out a sound and light alarm according to the safety distance of the corresponding voltage level to remind the electrical worker to pay attention to safety and avoid high voltage electric shock accident.
2. Alarm Voltage Range :1kV~132kV
3. Electricity Testing Mode :Non-contact mode
4. Detection Mode :Automatic trigger
主要功能
接地电阻、回路电阻测量
钳口尺寸:65mmx32mm
电阻量程:0.010Ω~1200Ω
泄漏电流量程:0.00mA~20.0A
报警临界值设定:1~199Ω
报警功能:声光报警
计量器具型式批准证书:CPA 2016E119-44
主要功能
二三四线法接地电阻量程:0.00Ω~30.00kΩ
土壤电阻率量程:0.00Ωm~9000kΩm
接地电压量程:AC 0~600V
数据存储:300组
报警功能:声光报警
主要功能
在被测回路不开路的情况下直接测量交流电压和交流电流,测量两电压间、两电流间和电压电流间的相位,间接测量电路的功率因数和功率;
判别三相相序,变压器接线组别、感性、容性电路,测试二次回路和母差保护系统,读出差动保护各组CT之间的相位关系,检查电度表的接线正确与否,检修线路设备等。
电压量程:0~500V
电流量程:0~10A
相位量程:0~360°
钳口尺寸:Φ8mm
主要功能
本仪器是一款多功能、智能化、人机操作简洁的综合型测试仪器,对所有的电压、电流、功率、电能、谐波、相位等电量参数做全面分析和诊断。
配置4款共16个电流钳,应对各种场所。
4通道电流、电压测量,同时捕捉和记录电量参数、波形。
为你提供工作所需的全部电能质量信息。
线路电压:600V以下
主要功能
高低压交流电流测量(600V以上使用绝缘杆操作)
量程:0mA-1200A
分辨率:1mA
无线传输:30米
峰值保持
数据存储:99组
线路电压:110kV以下测试,带绝缘杆操作(可定制500kV以下测试,仅限ETCR9000B)
钳口尺寸:Φ48mm