ETCR4000 Double Clamp Digital Phase Voltmeter-etcr

ETCR4000 Double Clamp Digital Phase Voltmeter

Product Main Function

1. Direct measurement of AC voltage and AC current in the measured circuit which not open-loop, measure the phase between two voltages, two current and voltage current, and indirectly measure the power factor and power of the circuit. Distinguish three-phase phase sequence, transformer wiring group, inductive and capacitive circuit, test secondary circuit and bus differential protection system, Read out the phase relationship between each group of CT in differential protection, check whether the wiring of the electricity meter is correct or not, overhaul the line equipment etc.

2. Voltage Range:0~500V;

3. Current Range :0~10A;

4. Phase Range :0~360°;

5. CT Size:Φ8mm

        ETCR4000 Double Clamp Digital Phase Voltmeter is a multifunctional instrument specially designed for field testing, with high accuracy, high stability, low power consumption and easy to use and other features. It can direct measurement of AC voltage and AC current in the measured circuit which not open-loop, measure the phase between two voltages, two current and voltage current, and indirectly measure the power factor and power of the circuit. Distinguish three-phase phase sequence, transformer wiring group, inductive and capacitive circuit, test secondary circuit and bus differential protection system, Read out the phase relationship between each group of CT in differential protection, check whether the wiring of the electricity meter is correct or not, overhaul the line equipment etc.

        ETCR4000 Double Clamp Digital Phase Voltmeter adopt super large LCD display screen, digital high 40mm, and with white screen backlight, display clear and obvious, shows the exquisite and luxurious appearance.

        ETCR4000 Double Clamp Digital Phase Voltmeter suitable for electric power, petrochemical, metallurgy, railway, meteorology, industrial and mining enterprises, scientific research institutes, metrology departments, etc

 Function  Direct testing of the phase, AC current, AC voltage, AC leakage current, phase sequence; differentiate transformer group, inductive,  capacitive circuit n; indirect testing of power factor, power.
 Power Supply  DC9V LR61.5V AAX6PCS
 Working Current  Open backlight max 35mA,the battery continues working about 15 hours;
 Close backlight, the meter power consumption about 5mA,the battery continues working 100 hours
 Display Mode  LCD display, white screen backlight function, suitable for dark places
 LCD Size  LCD Size:70mm×62mm; Display Area:64mm×54mm
 Meter Dimensions  196mm×92mm×54mm
 Sampling Rate  About 3 times/second
 Range  AC Voltage: 0~20V/200V/500V
 AC Current: 0~200mA/2A/10A
 Phase: 0~360°
 The amplitude range of the tested singal in measuring phase  Measure phase U1-U2:30V~500V;
 Measure phase I1-I2:10mA~10.00A
 Measure phase U1-I2 or I1-U2:10V~500V、10mA~10.00A
 Data Hold  In measurement, press HOLD key to hold data,“DH” symbol display
 Auto Shut Down  15 minutes after boot up, the meter shuts down automatically without any operation, to reduce battery consumption
 Voltage Detection  When the battery voltage is lower than 7.8-8V, low battery symbol display,and remind to replace the battery.
 Meter Weight  Host: 550g(with battery) ; Current Clamp: 170g x 2; Test wires : 250g
 Test Wire Length  1.5m
 Current Clamp Wire Length  2m
 Working Temperature  -10℃~40℃; below 80%Rh
 Store Temperature  -10℃~60℃; below 70%Rh
 Input Impedance  Test voltage each gears input impedance: 1MΩ; 
 Measure phase U1U2 voltage input impedance :40KΩ
 Withstand voltage   It took 1 minute to withstand 1000V/50Hz sine wave AC voltage between the meter line and the out shell.
 Insulation  ≥10MΩ between the instrument line and the casing, between the two voltage input terminals
 Structure  Double insulation
Model Shift CT Size Current Range Voltage Range Communication Interface Data Storage
ETCR4000 manual control Φ8mm 0.0mA~10A 0~500V - -
ETCR4000A automatic Φ8mm 0.0mA~20.0A 0~600V USB-RS232 interface 1200 groups
ETCR4100 manual control Φ8mm - - - -
ETCR4200 automatic 35x40mm 0.0mA~600A 0~600V USB-RS232 interface 1200 groups

Package Outer Package Carton
Inner Package Aluminum box
Accessory  Host 1 PCS 
Instrument Case 1 PCS 
Current Clamp  2 PCS 
Test Wires 4 pcs (red 2 pcs,black 2pcs )
Manual , Warranty Card ,Certificate 1pcs 


ETCR4000