ETCR1000D Non-contact Phase Sequence Detector-ETCR
〈
〉

ETCR1000D Non-contact Phase Sequence Detector

Product Main Function

1. Phase sequence detection (positive phase, anti-phase, default phase), live line inspection, simple electrical inspection, fire line identification, default phase judgment, broken line location search, DC line breakpoint detection, line maintenance.

2. Phase Sequence State: dynamic acousto-optic indication

3. Line voltage: 70~1000V

4. Clamp wire diameter: Φ10mm～Φ40mm

  ETCR1000D Non-contact Phase Sequence Detector with non-contact phase sequence detection, live line inspection, simple electrical inspection, fire line identification, default phase judgment, broken line location search and other functions, can clamp the wire with outer diameter Φ1.6mm～Φ16mm, When using, the insulation clamp can be directly clamped on the insulation skin of the live wire to test, no need to stripping off the wire or touching the exposed live wire of high voltage. The measurement result is dynamic display of LED, which is very clearness and directness, improves the safety and convenience of the test, and practically protects the personal safety of the operators.

The bottom plate of the instrument is equipped with magnets, the instrument can be attached to the metal shell of the equipment in the test, which makes the operation more convenient. The three clamps adopt 3 colors of the out shell,  which is more in line with the distinction of three-phase line and the national standard (GB681).


.

1000D

 Power Supply  AA batteries (LR6) ×2 PCS
 CT Jaw Size  Can clamp and test wire diameter Φ10mm～Φ40mm
 LCD Size  None
 Detect Voltage Range  AC70～1000V
 Auto Shut Down  After 5 minutes, the meter auto shut down without any operation
 Working Temperature  -10~50℃; below 80%rh
 Store Temperature  -20～60℃; below 90%rh
 LED Display 【Positive phase sequence】The four phase detector lamp lights up clockwise
【Negative phase sequence】The four phase detector lamp lights up  counterclockwise
【live-voltage indication】 L1, L2, L3 lamps light up in setting voltage range
【Default phase】 L1 or L2, or L3 lamp is not lighting
【Open circuit】 L1 or L2, or L3 lamp is not lighting
 Beep Indication 【Positive phase sequence】the meter make short beep sound intermittently
【Negative phase sequence】the meter make long beep sound continuous
 Battery Check  The POWER indication lamp light up after boot up; the LOW BATTERY lamp light up when low battery
 Magnet  4pcs magnets are installed on the bottom plate of the instrument, which can be attached to the distribution box and load weight 800g
 Clamp Lead Length  0.6m
 Maximum Measurement Voltage  AC1000V
 Insulation Strength  5.4kVrms
 Maximum Rated Power  300mVA
 Suitable Safety Standard  EN61010-1: 2001, EN61010-031: 2002, Pollution level 2, CAT Ⅲ(600V)
 Meter Weight  200g (with battery)
 Meter Dimension  70mm×75mm×30mm

Model Clamp wire size
ETCR1000C Φ1.6~Φ16mm
ETCR1000D Φ10~Φ40mm

 Package  Outer Package  Carton
 Inner Package  Cloth bag
 Accessory  Meter  1pcs
 Cloth bag  1pcs
 Manual  1pcs
 Certificate  1pcs
 Warranty Card  1pcs




ETCR1000C、1000D Catalog
下载