ETCR7100D Super Large Caliber AC/DC Clamp Current Meter-ETCR

ETCR7100D Super Large Caliber AC/DC Clamp Current Meter

Product Main Function

1. Measurement of AC current , Range:0.0A~1000A

2. Measurement of DC current , Range:  0.0A~2000A

3. Resolution: 0.1A DC/AC

4. Data Storage: 99 groups

5. Line Voltage: below 600V

6. CT Size: 108mm x 148mm


ETCR7100D Super Large Caliber AC/DC Clamp Current Meter suitable for measuring AC/DC leakage current below 600V, range: AC0.0A~1000A,DC0.0A~2000A, CT size: 108mmx148mm, can clamp to test Φ108mm cable and 160mm×4mm flat steel ground wire, adopt non-contact current measurement, safe and simple operation.The instrument is small size, high accuracy, performance stable and function perfect, which is one of the necessary tools for electrician safety inspection and maintenance.

The instrument with data hold, data storage and other functions, can store 99 groups of data, the instrument connect computer by RS232 interface, stotage data can be uploaded to the computer, easy to read, analysis, save, print and so on.

ETCR7100D Super Large Caliber AC/DC Clamp Meter

 Function  Measurement of DC,AC current , peak current hold, online monitoring
 Power Supply  DC 6V (1.5V x 4)
 Clamp Size  148mmx108mm(can clamp φ108mmcable or160mm×4mm flat cable or steel flat ground cable)
 Range  AC  0.0A~1000A
 DC  0.0A~2000A
 Resolution
 0.1A DC/AC

 Accuracy (Reference condition)

  0.0A~999A: ±2%±5dgt
 1000A~1499A: ±3%±5dgt
 1500A~2000A: ±4%±5dgt
 Reference Condition  23℃±3℃,below 75%rh,The conductor is at the center of the clamp
 Frequency response
 AC:45Hz~400Hz

 Sampling Rate

 2 times/second

 Measurement method
 Clamp CT,Non-contact measurement
 Tested Conductor Position
 The detected conductor is in the center position of the clamp , and the deviation from the center position increases the maximum by 2%rdg
 Display Mode  4 digital LCD display

 Meter Dimension

 350mm(L)×180mm(W)×55mm(H)

 LCD Size

 47mm×28.5mm

 Polarity indication
 In DC current test auto identified and display“—” symbol
 Shift
 Automatic 
 Line voltage
 Below 600V circuit test
 Software  Yes, storage data of meter can be uploaded to computer by software

 USB Interface

 With USB interface, storage data can be uploaded to computer, software monitoring, USB cable length: 1.5m

 Data Storage

 99units, flash display “FULL” symbol indicate storage full

 USB Cable Length
 1.5M
 Data Storage  99 groups, flash display “FULL” symbol indicate storage full
 Peak Hold
 Peak value capture and hold function, long press HOLD key display peak value
 Data Hold
 Data hold function: "HOLD" symbol display
 Overflow Display
 Exceed measure range overflow function: "OL" symbol display
 Automatic Shutdown  5 Minutes after power on will shutdown automatically without any operation, to reduce battery consumption
 Battery Voltage
 When battery voltage lower than 4.6V, low battery voltage symbol will display, and remind to replace the battery
  Weight   Meter:1.5kg; Package: 2.6kg (include accessories)
  Working Current

 20mA

  Working Environment  -10℃~40℃;below 80%rh
  Store Environment  -10℃~60℃;below 70%rh
  Insulation Strengh  AC 3700kV/rms(Between backcover screw and shell)
  Suitable Safe Standard  IEC1010-1、IEC1010-2-032、Pollution 2、CAT Ⅲ(600V)

 Package   Outer Package  Carton
 Inner Package  Aluminum case
 Accessory  Meter  1 PCS
 Data software/ USB Communication cable  1 SET
 Package case  1 PCS
 Manual  1 PCS
 Certification  1 PCS
 Warranty Card  1 PCS


ETCR7100D