ETCR9200 H/L Voltage Clamp Current Meter-ETCR

ETCR9200 H/L Voltage Clamp Current Meter

Product Main Function

1. Measurement of H/L Voltage AC current (operate with insulation rod above 600V )

2. Range:AC  0mA~1200A

3. Resolution: 1mA

4. Peak hold, Data Storage: 99 Groups

5. Line voltage: Test of the wire with insulation skin below 60kV, test of  bare wire below 35kV (operate with insulation rod)

6. Clamp size: Φ68mm

ETCR9200 H/L Voltage Clamp Current Meter adopts CT  technology and mask digital integration technology, the instrument composed of special clamp current meter and  high voltage insulation rod, If not use  insulation rod, which can be used as high accuracy low voltage clamp current meter

ETCR9200 series H/L voltage clamp current meter connect with insulation rod, which can use for hight voltage line current measurement of   the wire with insulation skin below 60KV or  bare wire below 35KV, online current measurements, also with peak hold, data hold and data storage and so on function, the special clamp current meter convenient to clamp or withdraw the tested wire operate by push or pull back the insulation rod.It is widely used in substations, power plants, industrial and mining enterprises, inspection stations, electrical maintenance departments for current detection and electrical field operations. It can replace the H/L voltage transformation ratio tester, which can measure the H/L voltage current of the primary circuit and the secondary circuit respectively, and then calculate the H/L voltage transformation ratio. The insulation rod is handiness, and has the characteristics of moisture-proof, high temperature resistance, impact resistance, bending resistance, high insulation, scalable and so on.

 H/L voltage AC current measurement
 Power Supply  DC 6V(1.5V AAAx4)
 Test Mode
 Clamp CT, integration method, the instrument can be hung on the line to test, more convenient to operation
 CT Size
 Measurement Range  0mA~1200A(50/60Hz automatic)
 Max Resolution  1mA
 Shift  0mA~1200A automatic
 Test Accuracy (23℃±5℃,below 80%RH)  0mA~100A:  ±1%±5dgt 
 100A~599A: ±1.5%±5dgt  
 600A~1200A:     ±2%±5dgt
 Sampling Rate
 2 times/second
 Display Mode
 4 digital LCD display
 LCD Size
 Meter Size
 Data Storage  99 groups, in storage process "MEM" symbol display, "FULL" symbol flashes display indicate storage full
 Peak Hold  Automatically hold the test value at high point. Press PEAK key in the test mode ,the PEAK lamp lights up. The peak hold function is enabled, press PEAK key once again cancel this function
 Line Voltage  Test of the wire with insulation skin below 60kV, test of  bare wire below 35kV (operate with insulation rod)
 Data Hold  Press HOLD key to hold data in test mode, “HOLD” symbol display, press HOLD key once again cancel this function
 Data Access  "MR" symbol display, can look up all storage data
 Overflow Display  Exceed measurerange overflow function: "OLA" symbol display
 Auto Shut Down  15 minutes after boot up, the meter shuts down automatically without any operation, to reduce battery consumption
 Battery Voltage  When battery voltage is lower than 4.8V, low battery voltage symbolwill display and remind to replace battery.
 Meter Weight  3720g (include insulation rod) 
 Working Environment  -10℃~40℃;below 80%rh
 Store Environment  -10℃~60℃;below 70%rh
 Interference  No interference of 315MHz and 433MHz same frequency signals
 Insulation Rod Size  Φ32mm,1m/pcs(5pcs)
 Insulation Strength  AC110kV/rms(all 5pcs insulation rod connect, between the two ends)
 Anti-Dripping Type II

Model Description
Range Resolution Clamp Note
ETCR9200 H/L Voltage Clamp Current Meter 0mA~1200A 1mA Φ68mm  Base type
ETCR9200B Wireless H/L Voltage Clamp Current Meter Wireless type
ETCR9220  H/L Clamp Leakage Current Meter 0.00mA~60.0A 0.01mA Φ68mm  Base type
ETCR9220B  Wireless H/L Clamp Leakage Current Meter Wireless type

 Package Outer Package  Carton
Inner Package  Cloth bag
 Accessory Meter  1 PCS
insulation Rod(1M)  5 PCS
Cloth Bag  1 PCS
Manual  1 PCS
Certificate  1 PCS
Warranty Card  1 PCS